Polymetaal Etching Press HP-60

Special Order Item Please see below for details.

£2,568.00
£2,568.00
Tax included. Shipping calculated at checkout.
Size

Polymetaal Etching Press HP-60

Bed size 60 x 120cm

Overall dimensions L: 85cm x W: 100cm x H: 30cm

127cm diameter star wheel

Weight: 120kg

This press is upper roller driven (without gearing).

The spokes from the wheel are made of stainless steel pipe. If the spindles are loosened, the upper roller is raised by spring pressure. This makes presses ideally suited for lino and woodcut as well as intaglio printing. A pile of leather or cardboard can be placed under the spindles, thus providing more flexibility during printing. The upper roller has self lubricating bronze glide bearings and the lower roller ball bearings. The star wheel can be dismantled.

Blankets - Polymetaal recommend either a 2mm or 3mm pressed wool blanket with this press. If you want to use the press for embossing then multiple layers are required. In standard use if you use more blankets than necessary you will have to set a higher pressure for the same result. The 2mm blanket costs £60 inc. VAT (£50 excl. VAT) and the 3mm costs £90 inc VAT (£75 excl. VAT) - if you would like these added to your press order please email shop@handprinted.co.uk and we can send you an additional invoice. (Please note all of these prices are subject to change due to increasing costs, exhange rates etc.)

Polymetaal Press HP-60 without stand @ £2568 inc. VAT (£2140.00 excl. VAT)

Polymetaal Press HP-60 with simple stand @ £2838 inc. VAT (£2365.00 excl. VAT)

Polymetaal Press HP-60 with two shelf stand @ £2976 inc. VAT (£2480.00 excl. VAT)

Polymetaal Press HP-60 with two shelf stand and castors @ £3186 inc. VAT (£2655 excl.VAT)

Lead time can vary depending on stock levels in The Netherlands. Carriage is an additional cost to your location (at current times depending on your location it is approximately £500 plus VAT). Please email shop@handprinted.co.uk if you would like a quote.