Using Speedball Speed Clean to Remove Screen Filler

You will need:

Speedball Speed Clean
A nylon paint brush
A nylon scrubbing brush
Lots of hot water
A screen that has been used with screen filler

Use a nylon brush to coat both sides of your screen with Screen Filler. Leave for 3-5 minutes.

Use a nylon scrubbing brush to work the Speed Clean into the screen.

Use a jet of hot water to wash the screen filler out of the screen. Repeat as necessary, if the filler has been on the screen for a while you might need
to repeat a few times.

Hold the screen up to the light to check that all the screen filler has been removed. The screen could be stained from either the filler or the ink but
as long as you can see through all areas clearly you will have successfully removed the blockages.